C1760 – OBD-II DTC

OBD-II DTC C1760 – Air Suspension Rear Height Sensor High (SE) Signal Circuit Failure

DTC C1760 meaning

DTC C1760 refers to a diagnostic trouble code indicating a failure in the air suspension rear height sensor high (SE) signal circuit. This code is triggered when the vehicle’s onboard diagnostic system detects an abnormal voltage or signal from the rear height sensor, which is responsible for measuring the height of the vehicle’s rear suspension. The sensor’s readings are crucial for maintaining proper ride height and ensuring optimal performance of the air suspension system.

DTC C1760 symptoms

Common symptoms associated with DTC C1760 may include:

• Warning lights on the dashboard, such as the air suspension warning light.
• Unusual ride height, either too high or too low at the rear of the vehicle.
• Inconsistent or erratic behavior of the air suspension system.
• Decreased ride quality or handling issues.
• Possible air suspension compressor running excessively or not at all.

DTC C1760 causes

Several factors can lead to the triggering of DTC C1760, including:

• Faulty rear height sensor.
• Wiring issues, such as damaged or corroded wires in the sensor circuit.
• Connector problems, including loose or corroded connections.
• Faulty air suspension control module.
• Software issues within the vehicle’s onboard computer system.

DTC C1760 seriousness

DTC C1760 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s ability to operate, it can lead to significant handling and safety concerns if the air suspension system is not functioning correctly. Prolonged neglect of this code can result in further damage to the suspension components and may lead to costly repairs.

How to diagnose DTC C1760

To diagnose DTC C1760, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1760 code.
2. Inspect the rear height sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of corrosion.
4. Test the rear height sensor’s voltage and resistance using a multimeter to ensure it operates within specifications.
5. Examine the air suspension control module for any fault codes or software issues.
6. Clear the codes and perform a road test to see if the code reappears.

How to fix DTC C1760 step-by-step instructions

To fix DTC C1760, follow these step-by-step instructions:

1. Begin by inspecting the rear height sensor and its wiring for any signs of damage or wear.
2. If the sensor is faulty, replace it with a new one.
3. Repair or replace any damaged wiring or connectors found during the inspection.
4. Ensure all connections are clean and secure.
5. Test the new or repaired sensor to confirm it operates correctly.
6. Clear the DTC using an OBD-II scanner.
7. Perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC C1760

To erase DTC C1760, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the scanner’s menu and select the option to read or clear trouble codes.
4. Choose the option to erase the DTCs.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.