C1761 – OBD-II DTC

OBD-II DTC C1761 – Air Suspension Rear Height Sensor High (SE) Signal Circuit Open

DTC C1761 meaning

DTC C1761 refers to a diagnostic trouble code indicating an issue with the air suspension system, specifically related to the rear height sensor. The code signifies that there is a high signal circuit open condition detected in the rear height sensor circuit. This means that the vehicle’s onboard diagnostic system has identified that the signal from the rear height sensor is either too high or not being received at all, which can affect the air suspension’s ability to maintain proper ride height.

DTC C1761 symptoms

Common symptoms associated with DTC C1761 may include:

• Warning lights on the dashboard, such as the air suspension warning light.
• Inconsistent or incorrect ride height of the vehicle.
• Rough or bumpy ride quality due to improper suspension settings.
• Increased wear on suspension components.
• Possible loss of air suspension functionality.

DTC C1761 causes

Several factors can lead to the occurrence of DTC C1761, including:

• Faulty rear height sensor.
• Open or shorted wiring in the sensor circuit.
• Corroded or damaged connectors related to the height sensor.
• Issues with the air suspension control module.
• Improper installation or alignment of the height sensor.

DTC C1761 seriousness

DTC C1761 is considered a moderate to serious issue. While the vehicle may still be operable, the air suspension system’s performance can be compromised, leading to potential safety concerns. If left unaddressed, it may result in further damage to the suspension components and affect vehicle handling and stability.

How to diagnose DTC C1761

To diagnose DTC C1761, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1761 code.
2. Inspect the rear height sensor and its wiring for visible damage or disconnections.
3. Check the electrical connectors for corrosion or loose connections.
4. Test the rear height sensor with a multimeter to ensure it is functioning within specifications.
5. Examine the air suspension control module for any faults or issues.
6. Clear the DTC and perform a road test to see if the code returns.

How to fix DTC C1761 step-by-step instructions

To fix DTC C1761, follow these step-by-step instructions:

1. Start by inspecting the rear height sensor and its wiring for any visible damage.
2. If damage is found, repair or replace the wiring or sensor as necessary.
3. Clean any corroded connectors and ensure they are securely connected.
4. Test the rear height sensor with a multimeter to confirm it is operating correctly.
5. If the sensor is faulty, replace it with a new one.
6. Check the air suspension control module for any faults and replace if necessary.
7. After repairs, clear the DTC using an OBD-II scanner.
8. Perform a road test to ensure the issue is resolved and the code does not return.

How to erase DTC C1761

To erase DTC C1761, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the diagnostic trouble codes menu on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and perform a road test to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.