C1767 – OBD-II DTC

OBD-II DTC C1767 – Air Suspension Rear Height Sensor Low Signal Circuit Short To Battery

DTC C1767 meaning

DTC C1767 refers to a diagnostic trouble code indicating a problem with the air suspension system, specifically the rear height sensor. The code signifies that there is a low signal detected from the rear height sensor circuit, which is shorted to the battery voltage. This can lead to improper functioning of the air suspension system, affecting vehicle ride height and stability.

DTC C1767 symptoms

Common symptoms associated with DTC C1767 may include:

• Warning light illuminated on the dashboard
• Inconsistent or incorrect vehicle ride height
• Unusual noises from the air suspension system
• Decreased ride quality or handling issues
• Air suspension system may not engage or disengage properly

DTC C1767 causes

Several factors can lead to the occurrence of DTC C1767, including:

• Faulty rear height sensor
• Wiring issues, such as shorts or open circuits
• Corrosion or damage to electrical connectors
• Faulty air suspension control module
• Improper installation or alignment of the height sensor

DTC C1767 seriousness

DTC C1767 is considered a serious issue as it directly affects the vehicle’s air suspension system. If left unaddressed, it can lead to:

• Increased wear on suspension components
• Compromised vehicle handling and stability
• Potential safety hazards while driving
• Further damage to the air suspension system

How to diagnose DTC C1767

To diagnose DTC C1767, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the rear height sensor and its wiring for visible damage or corrosion.
3. Check the electrical connections for proper contact and integrity.
4. Test the rear height sensor with a multimeter to ensure it is functioning within specifications.
5. Examine the air suspension control module for faults or issues.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC C1767 step-by-step instructions

To fix DTC C1767, follow these step-by-step instructions:

1. Confirm the diagnosis by checking the rear height sensor and wiring.
2. If the sensor is faulty, replace it with a new one.
3. Repair any damaged wiring or connectors found during inspection.
4. Ensure all connections are secure and free of corrosion.
5. Reinstall the rear height sensor if it was removed for testing.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Perform a road test to verify that the issue is resolved and the code does not return.

How to erase DTC C1767

To erase DTC C1767, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.