C1768 – OBD-II DTC

OBD-II DTC C1768 – Air Suspension Rear Height Sensor Low Signal Circuit Short To Ground

DTC C1768 meaning

DTC C1768 refers to a diagnostic trouble code indicating a problem with the air suspension rear height sensor. Specifically, it signifies that there is a low signal circuit condition, which is often caused by a short to ground in the sensor circuit. This code is typically associated with vehicles equipped with air suspension systems that rely on height sensors to monitor and adjust the vehicle’s ride height for optimal performance and comfort.

DTC C1768 symptoms

Common symptoms associated with DTC C1768 may include:

• Warning lights illuminated on the dashboard, such as the air suspension warning light.
• Inconsistent or incorrect ride height adjustments.
• Unusual handling characteristics or a rough ride.
• Increased noise from the air suspension system.
• Possible vehicle sagging or lifting issues at the rear end.

DTC C1768 causes

Several factors can lead to the occurrence of DTC C1768, including:

• A short circuit in the wiring harness connected to the rear height sensor.
• Faulty rear height sensor itself.
• Corrosion or damage to electrical connectors.
• Issues with the air suspension control module.
• Improper installation or alignment of the height sensor.

DTC C1768 seriousness

DTC C1768 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s ability to operate, it can lead to compromised ride quality and handling. If left unaddressed, it may result in further damage to the air suspension system or other related components, potentially leading to costly repairs.

How to diagnose DTC C1768

To diagnose DTC C1768, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1768 code.
2. Inspect the wiring and connectors associated with the rear height sensor for any visible damage or corrosion.
3. Check the resistance and voltage of the rear height sensor using a multimeter.
4. Test the air suspension control module for proper operation.
5. Clear the code and perform a road test to see if the code returns.

How to fix DTC C1768 step-by-step instructions

To fix DTC C1768, follow these step-by-step instructions:

1. Begin by visually inspecting the wiring and connectors for the rear height sensor. Repair or replace any damaged components.
2. Test the rear height sensor with a multimeter to ensure it is functioning within specifications. Replace it if it is faulty.
3. Check for any shorts in the wiring harness by performing a continuity test.
4. Inspect the air suspension control module for any faults or issues. Replace if necessary.
5. After repairs, reconnect all components and clear the DTC using an OBD-II scanner.
6. Perform a road test to ensure the issue is resolved and the code does not return.

How to erase DTC C1768

To erase DTC C1768, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.