C1814 – OBD-II DTC

OBD-II DTC C1814 – Air Suspension RR Vent Request Exceeded Max Timing

DTC C1814 meaning

DTC C1814 refers to a diagnostic trouble code related to the air suspension system, specifically indicating that the rear vent request has exceeded the maximum timing allowed. This code suggests that the system is unable to properly vent air from the rear suspension, which can lead to performance issues in the vehicle’s ride height and comfort.

DTC C1814 symptoms

Common symptoms associated with DTC C1814 may include:

• Warning lights on the dashboard, particularly the air suspension warning light.
• Unusual ride height, either too high or too low.
• Increased noise from the air suspension system.
• Inconsistent handling or stability while driving.
• Possible air leaks in the suspension system.

DTC C1814 causes

Several factors can contribute to the occurrence of DTC C1814, including:

• Faulty air suspension compressor.
• Blocked or damaged air lines.
• Malfunctioning height sensors.
• Electrical issues, such as short circuits or open circuits in the wiring.
• Software issues within the vehicle’s control module.

DTC C1814 seriousness

DTC C1814 is considered a serious issue as it directly affects the vehicle’s air suspension system. If left unaddressed, it can lead to:

• Decreased ride quality and comfort.
• Potential damage to suspension components.
• Increased risk of accidents due to poor handling.
• Further complications in the air suspension system, leading to costly repairs.

How to diagnose DTC C1814

To diagnose DTC C1814, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1814 code.
2. Inspect the air suspension system for visible damage or leaks.
3. Check the air compressor for proper operation.
4. Test the height sensors for accurate readings.
5. Examine the wiring and connectors for any signs of wear or damage.
6. Review the vehicle’s service history for any previous related repairs.

How to fix DTC C1814 step-by-step instructions

To fix DTC C1814, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged air lines or connections.
3. Replace the air suspension compressor if it is not functioning properly.
4. Calibrate or replace faulty height sensors as needed.
5. Check and repair any electrical issues in the wiring harness.
6. Test the air suspension system to ensure it operates correctly.
7. Re-scan the system to confirm that the DTC has not returned.

How to erase DTC C1814

To erase DTC C1814, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.