C1835 – OBD-II DTC

OBD-II DTC C1835 – Current Sense Circuit Failure

DTC C1835 meaning

DTC C1835 refers to a Current Sense Circuit Failure, which indicates a malfunction in the current sensing circuit of a vehicle’s system. This code is typically associated with issues in the electrical components that monitor current flow, often related to the vehicle’s traction control or stability control systems. The failure can prevent the system from accurately assessing the vehicle’s performance, leading to potential safety concerns.

DTC C1835 symptoms

Common symptoms associated with DTC C1835 may include:

• Illumination of the check engine light or warning indicators
• Reduced traction control or stability control functionality
• Unusual vehicle behavior during acceleration or cornering
• Increased wheel slip or loss of traction

DTC C1835 causes

The causes of DTC C1835 can vary, but typical reasons include:

• Faulty current sensor or wiring issues
• Corroded or damaged connectors
• Short circuits or open circuits in the current sensing circuit
• Malfunctioning control module

DTC C1835 seriousness

DTC C1835 is considered a serious issue as it can affect the vehicle’s stability and traction control systems. If left unaddressed, it may lead to compromised vehicle handling, increasing the risk of accidents, especially in adverse driving conditions. It is advisable to diagnose and repair this issue promptly to ensure safe vehicle operation.

How to diagnose DTC C1835

To diagnose DTC C1835, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1835 code.
2. Inspect the vehicle’s wiring and connectors related to the current sensing circuit for any visible damage or corrosion.
3. Check the current sensor for proper operation using a multimeter.
4. Examine the control module for any fault codes or issues.
5. Perform a continuity test on the wiring to ensure there are no breaks or shorts.

How to fix DTC C1835 step-by-step instructions

To fix DTC C1835, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors found during diagnosis.
3. Replace the faulty current sensor if it is not functioning correctly.
4. Ensure all connections are secure and free from corrosion.
5. Recheck the system for any additional fault codes after repairs.
6. Test drive the vehicle to confirm that the issue has been resolved and the warning lights do not reappear.

How to erase DTC C1835

To erase DTC C1835, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.