C1845 – OBD-II DTC

OBD-II DTC C1845 – Air Suspension Front Inflator Solenoid Output Circuit Failure

DTC C1845 meaning

DTC C1845 refers to a fault in the air suspension system, specifically indicating an issue with the Front Inflator Solenoid Output Circuit. This code is generated when the vehicle’s onboard diagnostic system detects a malfunction in the circuit that controls the solenoid responsible for inflating the front air suspension components. The air suspension system is crucial for maintaining ride quality and vehicle stability, and any failure in this circuit can lead to improper functioning of the suspension system.

DTC C1845 symptoms

Common symptoms associated with DTC C1845 may include:

• Warning lights on the dashboard, such as the air suspension warning light.
• Uneven ride height or sagging on one side of the vehicle.
• Increased noise from the air suspension system.
• Loss of ride comfort and handling performance.
• Inability to adjust the suspension height.

DTC C1845 causes

Several factors can lead to the triggering of DTC C1845, including:

• Faulty front inflator solenoid.
• Wiring issues, such as damaged or corroded wires in the solenoid output circuit.
• Bad connections or loose terminals in the air suspension system.
• Malfunctioning air suspension control module.
• Air leaks in the suspension system components.

DTC C1845 seriousness

DTC C1845 is considered a serious issue as it directly affects the vehicle’s air suspension system. If left unaddressed, it can lead to:

• Compromised vehicle handling and stability.
• Increased wear on suspension components.
• Potential safety hazards due to poor ride quality.
• Further damage to the air suspension system, leading to costly repairs.

How to diagnose DTC C1845

To diagnose DTC C1845, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1845.
2. Inspect the air suspension system for visible damage or leaks.
3. Check the wiring and connectors related to the front inflator solenoid for signs of wear or corrosion.
4. Test the front inflator solenoid for proper operation using a multimeter.
5. Examine the air suspension control module for faults or error codes.

How to fix DTC C1845 step-by-step instructions

To fix DTC C1845, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the solenoid output circuit.
3. Replace the front inflator solenoid if it is found to be faulty.
4. Check for air leaks in the suspension system and repair as necessary.
5. Recheck the system for proper operation and ensure the ride height is correct.
6. Perform a road test to confirm that the issue has been resolved.

How to erase DTC C1845

To erase DTC C1845 from the vehicle’s memory, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.