C1849 – OBD-II DTC

OBD-II DTC C1849 – Master Cylinder Pressure Out of Range

DTC C1849 meaning

DTC C1849 refers to a diagnostic trouble code indicating that the master cylinder pressure is out of range. This code is typically associated with the vehicle’s anti-lock braking system (ABS) or electronic stability control (ESC). It suggests that the pressure readings from the master cylinder are not within the expected parameters, which can affect braking performance and safety.

DTC C1849 symptoms

Common symptoms associated with DTC C1849 may include:

• Illuminated ABS warning light on the dashboard
• Reduced braking efficiency
• Increased stopping distance
• Unusual brake pedal feel (soft or hard)
• Potential activation of the traction control system

DTC C1849 causes

Several factors can lead to the triggering of DTC C1849, including:

• Faulty master cylinder
• Leaking brake lines or connections
• Defective brake pressure sensor
• Electrical issues such as short circuits or open circuits in the wiring
• Contaminated brake fluid

DTC C1849 seriousness

DTC C1849 is considered a serious issue as it directly impacts the vehicle’s braking system. If left unaddressed, it can lead to:

• Increased risk of brake failure
• Potential accidents due to compromised braking performance
• Higher repair costs if the issue worsens

How to diagnose DTC C1849

To diagnose DTC C1849, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1849 code.
2. Inspect the brake fluid level and condition.
3. Check for any visible leaks in the brake lines and connections.
4. Test the master cylinder for proper operation.
5. Examine the brake pressure sensor and its wiring for faults.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC C1849 step-by-step instructions

To fix DTC C1849, follow these step-by-step instructions:

1. Ensure the vehicle is safely lifted and secured.
2. Inspect and replace any damaged or leaking brake lines.
3. Replace the master cylinder if it is found to be faulty.
4. Test and replace the brake pressure sensor if necessary.
5. Flush and replace contaminated brake fluid.
6. Reconnect any loose or damaged wiring related to the brake system.
7. Clear the DTC using an OBD-II scanner and perform a test drive.

How to erase DTC C1849

To erase DTC C1849, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the diagnostic menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.