C1854 – OBD-II DTC

OBD-II DTC C1854 – Motor Temperature Out of Range

DTC C1854 meaning

DTC C1854 refers to a diagnostic trouble code indicating that the motor temperature is out of range. This code is typically associated with the vehicle’s powertrain control module (PCM) and is triggered when the temperature readings from the motor exceed or fall below the expected parameters. This can affect the performance and efficiency of the vehicle.

DTC C1854 symptoms

Common symptoms associated with DTC C1854 may include:

• Overheating of the engine
• Reduced engine performance
• Illuminated check engine light
• Erratic engine behavior
• Increased fuel consumption

DTC C1854 causes

Several factors can lead to the triggering of DTC C1854, including:

• Faulty temperature sensor
• Wiring issues or short circuits in the sensor circuit
• Coolant leaks or low coolant levels
• Malfunctioning thermostat
• Engine overheating due to external factors

DTC C1854 seriousness

DTC C1854 is considered a serious issue as it can lead to engine damage if not addressed promptly. Overheating can cause significant wear and tear on engine components, potentially leading to costly repairs. It is essential to diagnose and resolve the underlying issue to prevent further complications.

How to diagnose DTC C1854

To diagnose DTC C1854, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the engine temperature sensor and its wiring for damage or corrosion.
3. Check the coolant level and look for any leaks in the cooling system.
4. Test the thermostat for proper operation.
5. Monitor the engine temperature readings while the vehicle is running to identify any irregularities.

How to fix DTC C1854 step-by-step instructions

To fix DTC C1854, follow these step-by-step instructions:

1. Start by addressing any coolant leaks and refill the coolant to the appropriate level.
2. Replace the faulty engine temperature sensor if it is found to be defective.
3. Repair or replace any damaged wiring or connectors associated with the temperature sensor.
4. Replace the thermostat if it is not functioning correctly.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC C1854

To erase DTC C1854, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.