C1855 – OBD-II DTC

OBD-II DTC C1855 – Acceleration Position Sensor Conflict

DTC C1855 meaning

DTC C1855 refers to a conflict detected in the acceleration position sensor, which is a critical component in the vehicle’s electronic control system. This code indicates that there is a discrepancy between the signals received from the acceleration position sensor and the expected values. The acceleration position sensor is responsible for monitoring the position of the accelerator pedal, which directly affects engine performance and vehicle speed.

DTC C1855 symptoms

Common symptoms associated with DTC C1855 may include:

• Illumination of the check engine light
• Unresponsive or erratic acceleration
• Reduced engine power or performance
• Increased fuel consumption
• Potential stalling or hesitation during acceleration

DTC C1855 causes

Several factors can lead to the triggering of DTC C1855, including:

• Faulty acceleration position sensor
• Wiring issues, such as damaged or corroded connectors
• Faulty engine control module (ECM)
• Calibration issues within the sensor
• Interference from other electronic components

DTC C1855 seriousness

DTC C1855 is considered a serious issue as it can affect vehicle performance and safety. If left unaddressed, it may lead to:

• Increased risk of accidents due to unresponsive acceleration
• Potential engine damage from improper fuel delivery
• Failure to pass emissions tests

How to diagnose DTC C1855

To diagnose DTC C1855, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the acceleration position sensor and its wiring for any visible damage.
3. Check for any additional DTCs that may provide more context.
4. Test the acceleration position sensor using a multimeter to ensure it is functioning correctly.
5. Examine the engine control module for any faults or updates.

How to fix DTC C1855 step-by-step instructions

To fix DTC C1855, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the acceleration position sensor.
3. Replace the acceleration position sensor if it is found to be faulty.
4. Recalibrate the sensor if necessary, following manufacturer specifications.
5. Reconnect all components and perform a test drive to ensure the issue is resolved.

How to erase DTC C1855

To erase DTC C1855, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the codes.
5. Turn off the ignition and disconnect the scanner.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.