C1872 – OBD-II DTC

OBD-II DTC C1872 – Air Suspension Gate Solenoid Output Circuit Short To Ground

DTC C1872 meaning

DTC C1872 refers to a diagnostic trouble code indicating a short circuit to ground in the air suspension gate solenoid output circuit. This code is specific to vehicles equipped with air suspension systems, which utilize solenoids to control the height and firmness of the suspension. A short to ground means that the electrical circuit is unintentionally connected to the vehicle’s chassis, causing improper operation of the air suspension system.

DTC C1872 symptoms

Common symptoms associated with DTC C1872 may include:

• Warning lights on the dashboard, such as the air suspension warning light.
• Inconsistent or erratic air suspension performance.
• Vehicle may sit lower or higher than intended.
• Possible loss of ride quality or comfort.
• Inability to adjust the air suspension settings.

DTC C1872 causes

Several factors can lead to the occurrence of DTC C1872, including:

• Damaged wiring or connectors in the air suspension solenoid circuit.
• Faulty air suspension gate solenoid.
• Corrosion or moisture in electrical connections.
• Short circuits caused by aftermarket modifications or repairs.
• Issues with the vehicle’s control module or air suspension control system.

DTC C1872 seriousness

DTC C1872 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can lead to compromised ride quality and handling. If left unaddressed, it may result in further damage to the air suspension system or related components, potentially leading to costly repairs.

How to diagnose DTC C1872

To diagnose DTC C1872, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1872 code.
2. Inspect the air suspension wiring and connectors for visible damage or corrosion.
3. Check the air suspension gate solenoid for proper operation using a multimeter.
4. Test for continuity in the circuit to ensure there are no shorts to ground.
5. Examine the vehicle’s control module for any related fault codes or issues.

How to fix DTC C1872 step-by-step instructions

To fix DTC C1872, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to see if the code returns.
2. If the code reappears, inspect the wiring harness for any signs of wear, fraying, or damage.
3. Repair or replace any damaged wiring or connectors found during the inspection.
4. Test the air suspension gate solenoid for proper functionality and replace it if necessary.
5. Check for any moisture or corrosion in electrical connections and clean or replace as needed.
6. Recheck the circuit for shorts to ground and ensure all connections are secure.
7. Clear the DTC again and perform a final test drive to confirm the issue is resolved.

How to erase DTC C1872

To erase DTC C1872, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.