OBD-II DTC C1900 – Steering VAPS II Circuit Loop Short To Ground
DTC C1900 meaning
DTC C1900 refers to a diagnostic trouble code indicating a fault in the Steering VAPS II (Variable Assist Power Steering) circuit. This code specifically points to a short circuit to ground within the circuit loop, which can affect the performance of the power steering system. The VAPS II system is designed to adjust the steering effort based on vehicle speed and driver input, enhancing the driving experience and vehicle control.
DTC C1900 symptoms
Common symptoms associated with DTC C1900 may include:
- Loss of power steering assist
- Steering wheel feels heavy or difficult to turn
- Steering warning light illuminated on the dashboard
- Unusual noises from the steering system
- Erratic steering response
DTC C1900 causes
Several factors can lead to the occurrence of DTC C1900, including:
- Wiring issues such as frayed or damaged wires
- Corrosion or poor connections in the steering circuit
- Faulty steering angle sensor
- Defective power steering control module
- Short circuits due to aftermarket modifications or repairs
DTC C1900 seriousness
DTC C1900 is considered a serious issue as it can lead to a complete loss of power steering assist. This can significantly affect vehicle handling and safety, especially at low speeds or during parking maneuvers. It is crucial to address this code promptly to ensure safe operation of the vehicle.
How to diagnose DTC C1900
To diagnose DTC C1900, follow these steps:
- Use an OBD-II scanner to confirm the presence of the C1900 code.
- Inspect the wiring and connectors related to the steering VAPS II system for any visible damage or corrosion.
- Check the steering angle sensor for proper operation and calibration.
- Test the power steering control module for faults or failures.
- Perform a continuity test on the circuit to identify any shorts to ground.
How to fix DTC C1900 step-by-step instructions
To fix DTC C1900, follow these step-by-step instructions:
- Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
- Inspect and repair any damaged wiring or connectors in the steering circuit.
- Replace any faulty components, such as the steering angle sensor or power steering control module.
- Ensure all connections are clean and secure to prevent future issues.
- Reconnect the battery and clear the DTC using an OBD-II scanner.
- Test drive the vehicle to ensure the power steering system is functioning correctly and the code does not reappear.
How to erase DTC C1900
To erase DTC C1900, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Access the trouble codes menu on the scanner.
- Select the option to clear or erase trouble codes.
- Confirm the action and wait for the scanner to complete the process.
- Disconnect the scanner and perform a test drive to ensure the code does not return.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.