C1912 – OBD-II DTC

OBD-II DTC C1912 – Ride Control RF Shock Actuator Circuit Short To Ground

DTC C1912 meaning

DTC C1912 refers to a diagnostic trouble code indicating a short circuit to ground in the right front shock actuator circuit of a vehicle’s ride control system. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper functionality. The right front shock actuator is responsible for adjusting the suspension system to enhance ride quality and handling. A short to ground in this circuit can disrupt the actuator’s operation, leading to potential handling and stability issues.

DTC C1912 symptoms

Common symptoms associated with DTC C1912 may include:

• Warning lights on the dashboard, such as the ride control or suspension warning light.
• Decreased ride quality, leading to a rough or bumpy driving experience.
• Inconsistent handling or stability while driving.
• Possible noise from the suspension system when driving over bumps.

DTC C1912 causes

Several factors can lead to the occurrence of DTC C1912, including:

• A damaged or frayed wire in the right front shock actuator circuit.
• Corrosion or poor connections at the actuator or related connectors.
• Faulty right front shock actuator itself.
• Issues with the vehicle’s control module that manages the ride control system.

DTC C1912 seriousness

DTC C1912 is considered a moderate to serious issue. While the vehicle may still be operable, the compromised ride control system can lead to:

• Increased wear on suspension components.
• Reduced vehicle stability, especially during cornering or sudden maneuvers.
• Potential safety risks for the driver and passengers.

How to diagnose DTC C1912

To diagnose DTC C1912, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1912 code.
2. Inspect the wiring and connectors associated with the right front shock actuator for any visible damage or corrosion.
3. Perform a continuity test on the actuator circuit to check for shorts to ground.
4. Test the right front shock actuator for proper operation using a multimeter or actuator testing tool.
5. Check the vehicle’s control module for any related fault codes or issues.

How to fix DTC C1912 step-by-step instructions

To fix DTC C1912, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect the wiring harness and connectors for the right front shock actuator. Repair or replace any damaged wires or connectors.
3. If the actuator is faulty, remove it and install a new or refurbished right front shock actuator.
4. Reconnect all connectors and wiring, ensuring they are secure and free of corrosion.
5. Reconnect the vehicle’s battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and monitor for any reoccurrence of the code.

How to erase DTC C1912

To erase DTC C1912, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
5. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.