C1913 – OBD-II DTC

OBD-II DTC C1913 – Ride Control LF Shock Actuator Circuit Failure

DTC C1913 meaning

DTC C1913 refers to a fault in the Ride Control Left Front (LF) Shock Actuator Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the electrical circuit that controls the left front shock actuator, which is responsible for adjusting the suspension system to enhance ride quality and handling.

DTC C1913 symptoms

Common symptoms associated with DTC C1913 may include:

• Warning lights illuminated on the dashboard, such as the suspension or check engine light.
• Decreased ride quality, leading to a rough or bumpy driving experience.
• Inconsistent handling or stability issues while driving.
• Possible noise from the suspension system when driving over bumps.

DTC C1913 causes

Several factors can lead to the occurrence of DTC C1913, including:

• Faulty left front shock actuator.
• Wiring issues, such as damaged or corroded wires in the actuator circuit.
• Connector problems, including loose or corroded connections.
• Malfunctioning suspension control module.
• Software issues within the vehicle’s control systems.

DTC C1913 seriousness

DTC C1913 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s ability to operate, it can lead to compromised ride quality and handling, which may pose safety risks. Ignoring this code can result in further damage to the suspension system and increased repair costs.

How to diagnose DTC C1913

To diagnose DTC C1913, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1913.
2. Inspect the left front shock actuator and its wiring for visible damage or corrosion.
3. Check the connectors for secure connections and signs of wear.
4. Test the shock actuator for proper operation using a multimeter.
5. Examine the suspension control module for faults or software issues.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC C1913 step-by-step instructions

To fix DTC C1913, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the left front shock actuator.
3. If the shock actuator is faulty, replace it with a new or refurbished unit.
4. Reconnect all connectors securely and ensure there are no loose connections.
5. Reconnect the vehicle’s battery.
6. Use an OBD-II scanner to clear the DTC and perform a test drive to verify that the issue is resolved.

How to erase DTC C1913

To erase DTC C1913, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Access the diagnostic menu on the scanner and locate the option to clear or erase trouble codes.
4. Select the option to erase DTCs and confirm the action.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.