C1927 – OBD-II DTC

OBD-II DTC C1927 – VAPS Solenoid Actuator Return Circuit Short To Battery

DTC C1927 meaning

DTC C1927 refers to a diagnostic trouble code indicating a problem with the Vehicle Active Suspension System (VAPS) solenoid actuator return circuit. Specifically, it signifies that there is a short circuit in the return circuit that connects the solenoid actuator to the battery. This can lead to improper functioning of the suspension system, affecting vehicle handling and ride quality.

DTC C1927 symptoms

Common symptoms associated with DTC C1927 may include:

• Warning lights on the dashboard, particularly the suspension or check engine light.
• Unusual vehicle handling or ride quality, such as excessive bouncing or stiffness.
• Inconsistent suspension height adjustments.
• Increased wear on suspension components.

DTC C1927 causes

Several factors can lead to the occurrence of DTC C1927, including:

• Wiring issues, such as frayed or damaged wires in the solenoid actuator return circuit.
• Corrosion or poor connections at the electrical connectors.
• Faulty solenoid actuator that may be shorted internally.
• Issues with the vehicle’s control module that manages the suspension system.

DTC C1927 seriousness

DTC C1927 is considered a serious issue as it directly impacts the vehicle’s suspension system. If left unaddressed, it can lead to:

• Compromised vehicle safety due to poor handling.
• Increased risk of suspension component failure.
• Potential for further electrical issues within the vehicle.

How to diagnose DTC C1927

To diagnose DTC C1927, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1927.
2. Inspect the wiring and connectors associated with the VAPS solenoid actuator for any visible damage or corrosion.
3. Check the resistance and continuity of the return circuit to ensure it is within specifications.
4. Test the solenoid actuator for proper operation using a multimeter.
5. Examine the vehicle’s control module for any fault codes or issues that may affect the suspension system.

How to fix DTC C1927 step-by-step instructions

To fix DTC C1927, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the solenoid actuator return circuit.
3. Replace any corroded connectors to ensure a good electrical connection.
4. If the solenoid actuator is faulty, replace it with a new unit.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the suspension system operates correctly and the DTC does not reappear.

How to erase DTC C1927

To erase DTC C1927, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to ensure the DTC does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.