C1937 – OBD-II DTC

OBD-II DTC C1937 – Steering Wheel Angle Sensor Offset Failure

DTC C1937 meaning

DTC C1937 refers to a fault in the Steering Wheel Angle Sensor Offset. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the calibration or performance of the steering wheel angle sensor. This sensor is crucial for various vehicle systems, including stability control and advanced driver-assistance systems (ADAS).

DTC C1937 symptoms

Common symptoms associated with DTC C1937 may include:

• Illumination of the check engine light or warning indicators on the dashboard
• Inconsistent steering response or handling issues
• Activation of stability control or traction control systems
• Difficulty in aligning the steering wheel
• Unusual noises from the steering column

DTC C1937 causes

Several factors can lead to the occurrence of DTC C1937, including:

• Faulty steering wheel angle sensor
• Improper installation or calibration of the sensor
• Wiring issues, such as damaged or corroded connectors
• Software glitches in the vehicle’s control modules
• Mechanical issues within the steering system

DTC C1937 seriousness

The seriousness of DTC C1937 can vary depending on the vehicle’s design and the systems affected. It is generally considered a moderate to serious issue because:

• It can affect vehicle handling and stability
• It may lead to further damage if not addressed
• It can disable certain safety features, increasing the risk of accidents

How to diagnose DTC C1937

To diagnose DTC C1937, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the steering wheel angle sensor and its wiring for damage or disconnection.
4. Verify the sensor’s calibration using a scan tool or manufacturer-specific procedures.
5. Test the sensor’s output while turning the steering wheel to ensure it responds correctly.

How to fix DTC C1937 step-by-step instructions

To fix DTC C1937, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the steering wheel angle sensor.
2. If the sensor is faulty, replace it with a new one.
3. Recalibrate the steering wheel angle sensor according to the manufacturer’s specifications.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC C1937

To erase DTC C1937, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.