C1953 – OBD-II DTC

OBD-II DTC C1953 – Master Cylinder Pressure Sensor Circuit Open

DTC C1953 meaning

DTC C1953 refers to a diagnostic trouble code indicating an open circuit in the master cylinder pressure sensor circuit. This sensor is crucial for monitoring the hydraulic pressure within the brake system, and an open circuit suggests a disruption in the electrical signal transmission from the sensor to the vehicle’s control module.

DTC C1953 symptoms

Common symptoms associated with DTC C1953 may include:

• Illumination of the brake warning light on the dashboard
• Inconsistent or erratic brake performance
• Increased stopping distance
• Potential activation of the anti-lock braking system (ABS) warning light
• Diagnostic trouble codes related to brake system performance

DTC C1953 causes

Several factors can lead to the occurrence of DTC C1953, including:

• Faulty master cylinder pressure sensor
• Damaged wiring or connectors in the sensor circuit
• Corrosion or poor connections at the sensor or control module
• Issues with the vehicle’s control module
• Electrical shorts or open circuits in the brake system wiring

DTC C1953 seriousness

DTC C1953 is considered a serious issue as it directly affects the vehicle’s braking system. If left unaddressed, it can lead to:

• Reduced braking efficiency
• Increased risk of brake failure
• Potential safety hazards for the driver and others on the road

How to diagnose DTC C1953

To diagnose DTC C1953, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC C1953.
2. Inspect the master cylinder pressure sensor and its wiring for visible damage or corrosion.
3. Check the electrical connections for tightness and cleanliness.
4. Test the master cylinder pressure sensor using a multimeter to ensure it is functioning correctly.
5. Examine the vehicle’s control module for any related trouble codes or issues.
6. Perform a continuity test on the wiring between the sensor and the control module.

How to fix DTC C1953 step-by-step instructions

To fix DTC C1953, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the master cylinder pressure sensor circuit.
3. If the sensor is faulty, replace it with a new one.
4. Ensure all connections are secure and free of corrosion.
5. Reconnect the battery if it was disconnected during repairs.
6. Test drive the vehicle to ensure the issue is resolved and the DTC does not reappear.

How to erase DTC C1953

To erase DTC C1953, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code has been erased.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.