C1957 – OBD-II DTC

OBD-II DTC C1957 – Dynamic Stability Control Valve RF Circuit Failure

DTC C1957 meaning

DTC C1957 refers to a fault in the Dynamic Stability Control (DSC) system, specifically indicating a failure in the Right Front (RF) circuit of the DSC valve. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper functionality. The DSC system is crucial for maintaining vehicle stability during dynamic driving conditions by controlling wheel slip and traction.

DTC C1957 symptoms

Common symptoms associated with DTC C1957 may include:

• Illumination of the check engine light or stability control warning light
• Reduced traction control functionality
• Increased wheel slip during acceleration
• Unusual handling characteristics, especially in slippery conditions
• Potential activation of the anti-lock braking system (ABS) warning light

DTC C1957 causes

Several factors can lead to the occurrence of DTC C1957, including:

• Faulty DSC valve or actuator
• Wiring issues, such as short circuits or open circuits in the RF circuit
• Corrosion or damage to electrical connectors
• Malfunctioning wheel speed sensors
• Software issues within the vehicle’s control module

DTC C1957 seriousness

DTC C1957 is considered a serious issue as it directly affects the vehicle’s stability control system. If left unaddressed, it can lead to:

• Increased risk of loss of control during adverse driving conditions
• Potential for accidents due to compromised traction
• Failure of the vehicle to pass emissions tests or safety inspections

How to diagnose DTC C1957

To diagnose DTC C1957, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the C1957 code.
2. Inspect the wiring and connectors related to the DSC valve for any visible damage or corrosion.
3. Check the functionality of the DSC valve and actuator using a multimeter.
4. Examine the wheel speed sensors for proper operation and signal output.
5. Review the vehicle’s service history for any previous repairs related to the DSC system.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC C1957 step-by-step instructions

To fix DTC C1957, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors associated with the DSC valve.
3. Replace the DSC valve or actuator if testing indicates it is faulty.
4. Ensure all wheel speed sensors are functioning correctly and replace any that are defective.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to verify that the issue has been resolved and the code does not reappear.

How to erase DTC C1957

To erase DTC C1957, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes from the vehicle’s computer.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.