P0102 – OBD-II DTC

OBD-II DTC P0102 – Mass or Volume Air Flow Circuit Low Input

DTC P0102 meaning

DTC P0102 refers to a diagnostic trouble code that indicates a low input signal from the Mass or Volume Air Flow (MAF) sensor. The MAF sensor measures the amount of air entering the engine, which is crucial for the engine control unit (ECU) to calculate the correct fuel-to-air ratio. A low input signal suggests that the sensor is not providing the expected voltage or signal to the ECU, which can lead to poor engine performance and increased emissions.

DTC P0102 symptoms

Common symptoms associated with DTC P0102 may include:

• Check Engine Light illuminated
• Rough idling or stalling
• Decreased engine performance
• Poor fuel economy
• Difficulty starting the engine

DTC P0102 causes

Several factors can lead to the occurrence of DTC P0102, including:

• Faulty MAF sensor
• Wiring issues or damaged connectors in the MAF circuit
• Vacuum leaks in the intake system
• Dirty or contaminated MAF sensor
• Faulty engine control unit (ECU)

DTC P0102 seriousness

DTC P0102 is considered a moderate to serious issue. While the vehicle may still be operable, the low input from the MAF sensor can lead to poor engine performance, increased emissions, and potential long-term damage if not addressed. It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance and efficiency.

How to diagnose DTC P0102

To diagnose DTC P0102, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0102 code.
2. Inspect the MAF sensor and its wiring for any visible damage or disconnections.
3. Check for vacuum leaks in the intake system.
4. Test the MAF sensor’s voltage output using a multimeter while the engine is running.
5. Compare the readings to the manufacturer’s specifications.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC P0102 step-by-step instructions

To fix DTC P0102, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the MAF sensor.
2. Clean the MAF sensor using a specialized MAF sensor cleaner.
3. If the MAF sensor is faulty, replace it with a new one.
4. Check and repair any vacuum leaks in the intake system.
5. Recheck the MAF sensor’s voltage output after repairs.
6. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC P0102

To erase DTC P0102, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.