OBD-II DTC P0105 – Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction
DTC P0105 meaning
DTC P0105 refers to a malfunction in the Manifold Absolute Pressure (MAP) or Barometric Pressure (BARO) circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected a problem with the signal from the MAP sensor, which measures the pressure inside the intake manifold. This information is crucial for the ECM to calculate the correct air-fuel mixture for optimal engine performance.
DTC P0105 symptoms
Common symptoms associated with DTC P0105 may include:
- Check Engine Light illuminated
- Rough idling or stalling
- Decreased engine performance
- Poor fuel economy
- Difficulty starting the engine
DTC P0105 causes
Several factors can lead to the triggering of DTC P0105, including:
- Faulty MAP sensor
- Wiring issues or damaged connectors in the MAP sensor circuit
- Vacuum leaks in the intake manifold
- Faulty ECM or software issues
- Barometric pressure sensor malfunction
DTC P0105 seriousness
DTC P0105 can be considered serious as it affects the engine’s air-fuel mixture, potentially leading to poor performance and increased emissions. If left unaddressed, it may result in further engine damage or failure, as well as reduced fuel efficiency.
How to diagnose DTC P0105
To diagnose DTC P0105, follow these steps:
- Use an OBD-II scanner to confirm the presence of the code.
- Inspect the MAP sensor and its wiring for any visible damage or disconnections.
- Check for vacuum leaks in the intake manifold.
- Test the MAP sensor using a multimeter to ensure it is functioning correctly.
- Examine the ECM for any software updates or faults.
How to fix DTC P0105 step-by-step instructions
To fix DTC P0105, follow these steps:
- Inspect and repair any damaged wiring or connectors in the MAP sensor circuit.
- Replace the MAP sensor if it is found to be faulty.
- Fix any vacuum leaks in the intake manifold.
- Clear any software issues in the ECM by updating or reprogramming it if necessary.
- After repairs, use the OBD-II scanner to clear the code and test drive the vehicle to ensure the issue is resolved.
How to erase DTC P0105
To erase DTC P0105, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Access the trouble codes menu on the scanner.
- Select the option to clear or erase codes.
- Confirm the action and wait for the scanner to indicate that the codes have been cleared.
- Disconnect the scanner and start the engine to verify that the Check Engine Light does not reappear.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.