P0110 – OBD-II DTC

OBD-II DTC P0110 – IAT Circuit Malfunction

DTC P0110 meaning

DTC P0110 refers to a malfunction in the Intake Air Temperature (IAT) circuit. The IAT sensor measures the temperature of the air entering the engine, which is crucial for the engine control module (ECM) to optimize fuel injection and ignition timing. When the ECM detects a problem with the IAT circuit, it triggers this diagnostic trouble code (DTC).

DTC P0110 symptoms

Common symptoms associated with DTC P0110 may include:

• Check Engine Light illuminated
• Poor engine performance
• Increased fuel consumption
• Rough idling
• Difficulty starting the engine

DTC P0110 causes

Several factors can lead to the triggering of DTC P0110, including:

• Faulty IAT sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty ECM
• Intake air leaks

DTC P0110 seriousness

DTC P0110 can be serious as it affects the engine’s performance and efficiency. If left unaddressed, it may lead to:

• Increased emissions
• Potential engine damage
• Reduced fuel economy
• Overall poor vehicle performance

How to diagnose DTC P0110

To diagnose DTC P0110, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the IAT sensor and its wiring for any visible damage.
3. Check the electrical connectors for corrosion or looseness.
4. Test the IAT sensor with a multimeter to ensure it is functioning correctly.
5. Examine the intake system for any leaks that could affect air temperature readings.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P0110 step-by-step instructions

To fix DTC P0110, follow these steps:

1. Identify and replace a faulty IAT sensor if necessary.
2. Repair or replace damaged wiring or connectors in the IAT circuit.
3. Ensure all connections are secure and free of corrosion.
4. Check for and repair any intake air leaks.
5. Reinstall any components removed during diagnosis.
6. Clear the DTC using an OBD-II scanner.
7. Test drive the vehicle to confirm that the issue is resolved.

How to erase DTC P0110

To erase DTC P0110, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.