P0114 – OBD-II DTC

OBD-II DTC P0114 – Intake Air Temperature Circuit Intermittent

DTC P0114 meaning

DTC P0114 refers to an issue with the Intake Air Temperature (IAT) circuit. This code indicates that the Engine Control Module (ECM) has detected an intermittent problem with the signal from the IAT sensor. The IAT sensor measures the temperature of the air entering the engine, which is crucial for optimal fuel-air mixture and engine performance.

DTC P0114 symptoms

Common symptoms associated with DTC P0114 may include:

• Check Engine Light illuminated
• Poor engine performance
• Increased fuel consumption
• Rough idling
• Difficulty starting the engine

DTC P0114 causes

Several factors can lead to the triggering of DTC P0114, including:

• Faulty IAT sensor
• Wiring issues, such as frayed or damaged wires
• Corroded or loose electrical connectors
• Faulty ECM
• Air intake leaks

DTC P0114 seriousness

DTC P0114 can be considered a moderate issue. While it may not cause immediate engine failure, it can lead to poor engine performance and increased emissions. Ignoring this code may result in further complications, such as reduced fuel efficiency and potential damage to engine components over time.

How to diagnose DTC P0114

To diagnose DTC P0114, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0114 code.
2. Inspect the IAT sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connectors for tightness and cleanliness.
4. Test the IAT sensor with a multimeter to ensure it is functioning within specifications.
5. Examine the air intake system for leaks or blockages.
6. Clear the code and take the vehicle for a test drive to see if the code reappears.

How to fix DTC P0114 step-by-step instructions

To fix DTC P0114, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the IAT sensor.
2. If the IAT sensor is faulty, replace it with a new one.
3. Ensure all connections are secure and free of corrosion.
4. Check for and repair any air intake leaks.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC P0114

To erase DTC P0114, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.