P0141 – OBD-II DTC

OBD-II DTC P0141 – O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 2)

DTC P0141 meaning

DTC P0141 indicates that the Engine Control Module (ECM) has detected a problem with the oxygen sensor circuit for Bank 1 Sensor 2. This sensor is typically located after the catalytic converter and is responsible for monitoring the efficiency of the catalytic converter and the exhaust gases. The “No Activity Detected” message suggests that the ECM is not receiving a signal from the sensor, which may indicate a malfunction in the sensor itself or in the circuit connecting it to the ECM.

DTC P0141 symptoms

Common symptoms associated with DTC P0141 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Increased emissions
• Rough engine idle
• Failed emissions test

DTC P0141 causes

Several factors can lead to the occurrence of DTC P0141, including:

• Faulty oxygen sensor (Bank 1 Sensor 2)
• Wiring issues, such as frayed or damaged wires
• Corroded or loose connectors in the oxygen sensor circuit
• ECM malfunction
• Exhaust leaks before the sensor

DTC P0141 seriousness

The seriousness of DTC P0141 can vary. While it may not cause immediate engine damage, it can lead to:

• Increased emissions, which can contribute to environmental pollution
• Reduced fuel efficiency, leading to higher operating costs
• Potential failure of emissions testing
• Long-term engine performance issues if left unaddressed

How to diagnose DTC P0141

To diagnose DTC P0141, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any related codes.
2. Inspect the oxygen sensor wiring and connectors for damage or corrosion.
3. Test the oxygen sensor using a multimeter to check for proper voltage and resistance.
4. Check for exhaust leaks that may affect sensor readings.
5. Verify the operation of the ECM and ensure it is functioning correctly.

How to fix DTC P0141 step-by-step instructions

To fix DTC P0141, follow these steps:

1. Repair or replace any damaged wiring or connectors in the oxygen sensor circuit.
2. If the oxygen sensor is faulty, replace it with a new one.
3. Address any exhaust leaks that may be present.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the check engine light does not reappear.

How to erase DTC P0141

To erase DTC P0141, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.