P0147 – OBD-II DTC

OBD-II DTC P0147 – O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 3)

DTC P0147 meaning

DTC P0147 refers to a diagnostic trouble code indicating that the O2 sensor circuit for Bank 1 Sensor 3 has no activity detected. This means that the Engine Control Module (ECM) is not receiving a signal from the O2 sensor, which is responsible for monitoring the oxygen levels in the exhaust gases. The absence of this signal can lead to improper fuel management and increased emissions.

DTC P0147 symptoms

Common symptoms associated with DTC P0147 may include:

• Check Engine Light illuminated
• Poor fuel economy
• Rough engine idle
• Increased emissions
• Failed emissions test

DTC P0147 causes

Several factors can lead to the occurrence of DTC P0147, including:

• Faulty O2 sensor (Bank 1 Sensor 3)
• Wiring issues or damaged connectors in the O2 sensor circuit
• ECM malfunction
• Exhaust leaks before the O2 sensor
• Corrosion or poor connections in the sensor circuit

DTC P0147 seriousness

DTC P0147 is considered a moderate to serious issue. While the vehicle may still operate, the lack of a functioning O2 sensor can lead to:

• Increased fuel consumption
• Higher emissions, potentially causing environmental harm
• Long-term engine damage if not addressed
• Failure to pass emissions testing

How to diagnose DTC P0147

To diagnose DTC P0147, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0147 code.
2. Inspect the O2 sensor and its wiring for visible damage or corrosion.
3. Check the O2 sensor connector for proper connection and signs of wear.
4. Test the O2 sensor with a multimeter to ensure it is functioning correctly.
5. Inspect for exhaust leaks near the O2 sensor.
6. Check the ECM for any additional codes that may indicate related issues.

How to fix DTC P0147 step-by-step instructions

To fix DTC P0147, follow these steps:

1. Disconnect the battery to ensure safety while working on the vehicle.
2. Inspect and repair any damaged wiring or connectors related to the O2 sensor.
3. If the O2 sensor is faulty, replace it with a new one.
4. Ensure all connections are secure and free from corrosion.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Start the engine and monitor for any reoccurrence of the code.

How to erase DTC P0147

To erase DTC P0147, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.