OBD-II DTC P0152 – O2 Sensor Circuit Low Voltage (Bank 2 Sensor 1)
DTC P0152 meaning
DTC P0152 indicates a problem with the oxygen sensor circuit for Bank 2 Sensor 1. This code specifically points to low voltage detected in the O2 sensor circuit, which can affect the engine’s air-fuel mixture and overall performance. Bank 2 refers to the side of the engine that does not contain cylinder number one, while Sensor 1 is the upstream sensor located before the catalytic converter.
DTC P0152 symptoms
Common symptoms associated with DTC P0152 may include:
- Check Engine Light illuminated
- Poor fuel economy
- Rough idling or stalling
- Increased emissions
- Loss of power during acceleration
DTC P0152 causes
Several factors can lead to the triggering of DTC P0152, including:
- Faulty oxygen sensor
- Wiring issues such as shorts or open circuits
- Corroded or damaged connectors
- Exhaust leaks near the sensor
- Faulty engine control module (ECM)
DTC P0152 seriousness
DTC P0152 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to poor engine performance, increased emissions, and potential damage to the catalytic converter if not addressed. Ignoring this code can result in more significant repair costs down the line.
How to diagnose DTC P0152
To diagnose DTC P0152, follow these steps:
- Use an OBD-II scanner to confirm the code and check for any additional codes.
- Inspect the wiring and connectors for the oxygen sensor for any visible damage or corrosion.
- Test the voltage output of the oxygen sensor using a multimeter.
- Check for exhaust leaks that may affect sensor readings.
- Verify the operation of the engine control module (ECM) and its ability to process sensor data.
How to fix DTC P0152 step-by-step instructions
To fix DTC P0152, follow these steps:
- Inspect and repair any damaged wiring or connectors related to the oxygen sensor.
- Replace the faulty oxygen sensor if it is not functioning correctly.
- Seal any exhaust leaks that may be affecting the sensor’s performance.
- Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to ensure the code does not return.
- Monitor the vehicle’s performance and fuel economy after repairs.
How to erase DTC P0152
To erase DTC P0152, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
- Confirm the action to clear the codes.
- Disconnect the scanner and start the engine to verify that the check engine light is off.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.