P0175 – OBD-II DTC

OBD-II DTC P0175 – Fuel Trim too Lean (Bank 2)

DTC P0175 meaning

DTC P0175 indicates that the fuel trim for Bank 2 is too lean. This means that the engine control module (ECM) has detected that the air-fuel mixture in Bank 2 is not rich enough, leading to an imbalance in the combustion process. The ECM adjusts the fuel trim to maintain the optimal air-fuel ratio, and a lean condition can cause performance issues and increased emissions.

DTC P0175 symptoms

Common symptoms associated with DTC P0175 may include:

• Reduced engine performance
• Rough idling or stalling
• Increased fuel consumption
• Check Engine Light illuminated
• Difficulty starting the engine

DTC P0175 causes

Several factors can lead to the triggering of DTC P0175, including:

• Vacuum leaks in the intake system
• Faulty fuel injectors
• Clogged fuel filter
• Weak fuel pump
• Faulty mass air flow (MAF) sensor
• Exhaust leaks
• Faulty oxygen sensors

DTC P0175 seriousness

DTC P0175 is considered a serious issue as it can lead to poor engine performance and increased emissions. If left unaddressed, it may cause further damage to the engine or exhaust system components. It is advisable to diagnose and repair the issue promptly to maintain vehicle performance and compliance with emissions regulations.

How to diagnose DTC P0175

To diagnose DTC P0175, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any related codes.
2. Inspect the vacuum lines and intake system for leaks.
3. Check the fuel pressure to ensure it meets manufacturer specifications.
4. Examine the fuel injectors for proper operation.
5. Test the MAF sensor for accurate readings.
6. Inspect the oxygen sensors for proper functionality.
7. Look for any exhaust leaks that may affect sensor readings.

How to fix DTC P0175 step-by-step instructions

To fix DTC P0175, follow these steps:

1. Identify and repair any vacuum leaks in the intake system.
2. Replace or clean faulty fuel injectors.
3. Replace a clogged fuel filter if necessary.
4. Test and replace a weak fuel pump if fuel pressure is low.
5. Replace a faulty MAF sensor if it is not functioning correctly.
6. Replace faulty oxygen sensors if they are not providing accurate readings.
7. Repair any exhaust leaks that may be present.
8. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P0175

To erase DTC P0175, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the DTC menu on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.