P0183 – OBD-II DTC

OBD-II DTC P0183 – Fuel Temperature Sensor A Circuit Low Input

DTC P0183 meaning

DTC P0183 refers to a diagnostic trouble code indicating a low input signal from the Fuel Temperature Sensor A circuit. This sensor is responsible for monitoring the temperature of the fuel in the fuel system. A low input signal suggests that the sensor is either malfunctioning or that there is an issue within the circuit itself, such as a short to ground or an open circuit.

DTC P0183 symptoms

Common symptoms associated with DTC P0183 may include:

• Check Engine Light illuminated
• Decreased engine performance
• Increased fuel consumption
• Difficulty starting the engine
• Engine stalling or misfiring

DTC P0183 causes

Several factors can lead to the triggering of DTC P0183, including:

• Faulty fuel temperature sensor
• Wiring issues, such as damaged or corroded connectors
• Short circuit in the fuel temperature sensor circuit
• Open circuit in the fuel temperature sensor circuit
• Faulty engine control module (ECM)

DTC P0183 seriousness

The seriousness of DTC P0183 can vary depending on the vehicle’s symptoms. While it may not cause immediate safety concerns, it can lead to:

• Reduced engine efficiency
• Increased emissions
• Potential long-term damage to the fuel system

It is advisable to address this code promptly to avoid further complications.

How to diagnose DTC P0183

To diagnose DTC P0183, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the fuel temperature sensor for damage or corrosion.
4. Test the fuel temperature sensor using a multimeter to ensure it is functioning within specifications.
5. Check the ECM for proper operation and any software updates.

How to fix DTC P0183 step-by-step instructions

To fix DTC P0183, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. If the fuel temperature sensor is faulty, replace it with a new one.
3. Clear the DTC using an OBD-II scanner.
4. Test drive the vehicle to ensure the code does not return.
5. Re-scan the vehicle to confirm that the DTC has not reappeared.

How to erase DTC P0183

To erase DTC P0183, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.