P0184 – OBD-II DTC

OBD-II DTC P0184 – Fuel Temperature Sensor A Circuit High Input

DTC P0184 meaning

DTC P0184 refers to a diagnostic trouble code indicating a high input signal from the Fuel Temperature Sensor A circuit. This sensor is responsible for monitoring the temperature of the fuel in the fuel system. A high input signal suggests that the sensor is detecting a temperature that exceeds the expected range, which can lead to improper fuel management and engine performance issues.

DTC P0184 symptoms

Common symptoms associated with DTC P0184 may include:

• Check Engine Light illuminated
• Engine performance issues, such as rough idling or stalling
• Decreased fuel efficiency
• Difficulty starting the engine
• Increased emissions

DTC P0184 causes

Several factors can lead to the triggering of DTC P0184, including:

• Faulty fuel temperature sensor
• Wiring issues, such as short circuits or open circuits in the sensor circuit
• Corroded or loose electrical connections
• Faulty engine control module (ECM)
• Contaminated fuel

DTC P0184 seriousness

DTC P0184 can be considered serious as it may affect engine performance and fuel efficiency. If left unaddressed, it can lead to more significant issues, such as engine damage or increased emissions. It is advisable to diagnose and repair the issue promptly to ensure optimal vehicle operation.

How to diagnose DTC P0184

To diagnose DTC P0184, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0184 code.
2. Inspect the fuel temperature sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of contaminants.
4. Test the fuel temperature sensor using a multimeter to verify its resistance and output voltage.
5. Consult the vehicle’s service manual for specific resistance values and expected voltage ranges.
6. Check for any additional trouble codes that may provide further insight into the issue.

How to fix DTC P0184 step-by-step instructions

To fix DTC P0184, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the fuel temperature sensor.
3. If the sensor is faulty, replace it with a new one.
4. Ensure all connections are secure and free of corrosion.
5. Refill the fuel tank with clean, uncontaminated fuel.
6. Reconnect the battery if it was disconnected during repairs.
7. Start the engine and monitor for any reoccurrence of the DTC.

How to erase DTC P0184

To erase DTC P0184, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.