P0195 – OBD-II DTC

OBD-II DTC P0195 – Fuel Rail Pressure Sensor Circuit Intermittent

DTC P0195 meaning

DTC P0195 refers to an issue with the fuel rail pressure sensor circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an intermittent fault in the fuel rail pressure sensor circuit. The fuel rail pressure sensor is responsible for monitoring the pressure of the fuel in the rail and sending this information to the ECM to ensure optimal engine performance.

DTC P0195 symptoms

Common symptoms associated with DTC P0195 may include:

• Check Engine Light illuminated
• Engine stalling or misfiring
• Poor acceleration or reduced power
• Difficulty starting the engine
• Increased fuel consumption

DTC P0195 causes

Several factors can lead to the occurrence of DTC P0195, including:

• Faulty fuel rail pressure sensor
• Wiring issues such as frayed or damaged wires
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Fuel system issues, such as a clogged fuel filter or failing fuel pump

DTC P0195 seriousness

DTC P0195 can be serious as it affects the engine’s fuel delivery system. If left unaddressed, it may lead to:

• Increased emissions
• Engine performance issues
• Potential engine damage due to improper fuel pressure

It is advisable to diagnose and repair the issue promptly to maintain vehicle performance and reliability.

How to diagnose DTC P0195

To diagnose DTC P0195, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the fuel rail pressure sensor and its wiring for any visible damage.
3. Check the electrical connectors for corrosion or loose connections.
4. Test the fuel rail pressure sensor using a multimeter to ensure it is functioning correctly.
5. Examine the fuel system for any issues, such as a clogged filter or failing pump.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC P0195 step-by-step instructions

To fix DTC P0195, follow these step-by-step instructions:

1. Gather necessary tools, including a multimeter, OBD-II scanner, and basic hand tools.
2. Disconnect the battery to ensure safety while working on the electrical system.
3. Inspect the fuel rail pressure sensor and wiring for any signs of damage or wear.
4. If the sensor is faulty, replace it with a new one, ensuring proper installation.
5. Repair or replace any damaged wiring or connectors as needed.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Perform a road test to verify that the issue has been resolved and the DTC does not return.

How to erase DTC P0195

To erase DTC P0195, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Follow the prompts to clear the trouble codes from the ECM.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.