OBD-II DTC P0201 – Injector Circuit Malfunction
DTC P0201 meaning
DTC P0201 refers to a malfunction in the injector circuit for cylinder number one. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the fuel injector for the first cylinder. The injector may not be receiving the correct voltage or may be malfunctioning, leading to improper fuel delivery and engine performance issues.
DTC P0201 symptoms
Common symptoms associated with DTC P0201 may include:
- Engine misfires
- Rough idling
- Decreased engine performance
- Increased fuel consumption
- Check Engine Light (CEL) illuminated
DTC P0201 causes
Several factors can lead to the occurrence of DTC P0201, including:
- Faulty fuel injector
- Open or short circuit in the injector wiring
- Defective Engine Control Module (ECM)
- Corroded or loose electrical connectors
- Faulty fuel injector driver circuit
DTC P0201 seriousness
DTC P0201 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in:
- Increased emissions
- Potential engine damage
- Failure to start
- Reduced fuel efficiency
How to diagnose DTC P0201
To diagnose DTC P0201, follow these steps:
- Use an OBD-II scanner to confirm the DTC and check for any additional codes.
- Inspect the wiring and connectors for the injector circuit for any visible damage or corrosion.
- Test the fuel injector for proper resistance using a multimeter.
- Check the voltage and ground at the injector connector while the engine is running.
- Examine the ECM for any faults or issues that may affect the injector circuit.
How to fix DTC P0201 step-by-step instructions
To fix DTC P0201, follow these step-by-step instructions:
- Confirm the DTC and perform a visual inspection of the injector circuit.
- Repair or replace any damaged wiring or connectors.
- If the injector is faulty, replace it with a new one.
- Test the injector driver circuit in the ECM to ensure it is functioning correctly.
- Clear the DTC using an OBD-II scanner and perform a test drive to verify the repair.
How to erase DTC P0201
To erase DTC P0201, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn the ignition key to the “On” position without starting the engine.
- Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
- Confirm the action to clear the codes.
- Disconnect the scanner and start the engine to check if the code reappears.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.