P0206 – OBD-II DTC

OBD-II DTC P0206 – Injector Circuit Malfunction – Cylinder 5

DTC P0206 meaning

DTC P0206 refers to a malfunction in the injector circuit for cylinder 5. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the fuel injector for this specific cylinder. The injector may not be receiving the correct voltage or may be malfunctioning, leading to improper fuel delivery and engine performance issues.

DTC P0206 symptoms

Common symptoms associated with DTC P0206 include:

• Engine misfire or rough idle
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Potential stalling or difficulty starting the engine

DTC P0206 causes

Several factors can lead to the occurrence of DTC P0206, including:

• Faulty fuel injector for cylinder 5
• Wiring issues, such as damaged or corroded connectors
• Short circuits or open circuits in the injector circuit
• Faulty Engine Control Module (ECM)
• Issues with the fuel supply, such as low fuel pressure

DTC P0206 seriousness

DTC P0206 is considered a serious issue as it can lead to engine performance problems. If left unaddressed, it may result in further engine damage, increased emissions, and potential failure to pass emissions tests. It is advisable to diagnose and repair the issue promptly to maintain optimal engine performance and reliability.

How to diagnose DTC P0206

To diagnose DTC P0206, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0206 code.
2. Inspect the wiring and connectors for cylinder 5’s injector for any visible damage or corrosion.
3. Check the resistance of the injector using a multimeter to ensure it is within specifications.
4. Test the voltage supply to the injector while the engine is running.
5. Perform a functional test of the injector to see if it operates correctly.

How to fix DTC P0206 step-by-step instructions

To fix DTC P0206, follow these steps:

1. Repair or replace any damaged wiring or connectors related to the injector circuit.
2. If the injector is faulty, replace it with a new or refurbished unit.
3. Ensure that the ECM is functioning correctly if necessary, reprogram or replace it.
4. Clear the DTC using an OBD-II scanner after repairs are made.
5. Test drive the vehicle to ensure the issue is resolved and the Check Engine Light does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.