P0207 – OBD-II DTC

OBD-II DTC P0207 – Injector Circuit Malfunction – Cylinder 6

DTC P0207 meaning

DTC P0207 refers to a malfunction in the injector circuit for cylinder 6. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the fuel injector for the sixth cylinder. The problem could be related to the injector itself, the wiring, or the ECM’s ability to control the injector.

DTC P0207 symptoms

Common symptoms associated with DTC P0207 may include:

• Engine misfire or rough idle
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Difficulty starting the engine

DTC P0207 causes

Several factors can lead to the occurrence of DTC P0207, including:

• Faulty fuel injector for cylinder 6
• Open or short circuit in the injector wiring
• Defective ECM or poor ECM connections
• Corroded or damaged connectors
• Faulty fuel injector driver circuit within the ECM

DTC P0207 seriousness

DTC P0207 is considered a serious issue as it can lead to engine performance problems. If left unaddressed, it may result in further engine damage, increased emissions, and potential failure to pass emissions tests. It is advisable to diagnose and repair the issue promptly to maintain vehicle performance and reliability.

How to diagnose DTC P0207

To diagnose DTC P0207, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0207 code.
2. Inspect the wiring and connectors for cylinder 6’s injector for any visible damage or corrosion.
3. Test the fuel injector for cylinder 6 using a multimeter to check for proper resistance.
4. Check the injector driver circuit from the ECM to ensure it is functioning correctly.
5. Perform a continuity test on the wiring to ensure there are no breaks or shorts.
6. Consider testing the ECM if all other components are functioning properly.

How to fix DTC P0207 step-by-step instructions

To fix DTC P0207, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the injector circuit.
3. If the fuel injector is faulty, replace it with a new one.
4. Ensure all connections are secure and free of corrosion.
5. Test the injector driver circuit from the ECM to confirm it is functioning correctly.
6. Recheck for any DTCs after repairs and ensure the engine runs smoothly.

How to erase DTC P0207

To erase DTC P0207, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.