P0212 – OBD-II DTC

OBD-II DTC P0212 – Injector Circuit Malfunction – Cylinder 11

DTC P0212 meaning

DTC P0212 refers to a diagnostic trouble code indicating an injector circuit malfunction specifically for cylinder 11. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various components of the engine and emissions system. When the Engine Control Module (ECM) detects an issue with the fuel injector circuit for cylinder 11, it triggers this code, signaling that the injector may not be functioning correctly or that there is an electrical issue in the circuit.

DTC P0212 symptoms

Common symptoms associated with DTC P0212 may include:

• Engine misfires or rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Difficulty starting the engine

DTC P0212 causes

Several factors can lead to the triggering of DTC P0212, including:

• Faulty fuel injector for cylinder 11
• Open or short circuit in the injector wiring
• Defective Engine Control Module (ECM)
• Corroded or loose electrical connectors
• Fuel delivery issues, such as low fuel pressure

DTC P0212 seriousness

DTC P0212 is considered a serious issue as it can lead to engine performance problems and increased emissions. If left unaddressed, it may result in further engine damage or failure. It is advisable to diagnose and repair the issue promptly to ensure optimal engine performance and compliance with emissions regulations.

How to diagnose DTC P0212

To diagnose DTC P0212, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0212 code.
2. Inspect the wiring and connectors for cylinder 11’s injector for any visible damage or corrosion.
3. Check the resistance of the injector using a multimeter to ensure it is within specifications.
4. Test the injector circuit for continuity and proper voltage supply.
5. Perform a fuel pressure test to ensure adequate fuel delivery.
6. Consider checking the ECM for any faults or updates.

How to fix DTC P0212 step-by-step instructions

To fix DTC P0212, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the injector circuit.
3. If the injector is faulty, replace it with a new one.
4. Ensure that the fuel pressure is within the manufacturer’s specifications repair any fuel delivery issues if necessary.
5. Recheck the injector circuit for proper voltage and continuity.
6. Reconnect all components and clear the DTC again.
7. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.