P0215 – OBD-II DTC

OBD-II DTC P0215 – Cold Start Injector 2 Malfunction

DTC P0215 meaning

DTC P0215 refers to a malfunction in the cold start injector 2 circuit. The cold start injector is responsible for providing additional fuel to the engine during cold starts, helping to improve engine performance and reduce emissions. When the Engine Control Module (ECM) detects an issue with the cold start injector 2, it triggers this diagnostic trouble code (DTC).

DTC P0215 symptoms

Common symptoms associated with DTC P0215 may include:

• Difficulty starting the engine, especially in cold weather
• Rough idling or stalling after starting
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Engine misfires or poor acceleration

DTC P0215 causes

Several factors can lead to the triggering of DTC P0215, including:

• Faulty cold start injector 2
• Wiring issues or damaged connectors in the injector circuit
• Faulty Engine Control Module (ECM)
• Fuel delivery problems, such as low fuel pressure
• Vacuum leaks affecting air-fuel mixture

DTC P0215 seriousness

The seriousness of DTC P0215 can vary based on the symptoms experienced. While it may not cause immediate catastrophic failure, it can lead to:

• Increased emissions
• Poor engine performance
• Potential damage to the engine if not addressed

It is advisable to diagnose and repair the issue promptly to maintain vehicle performance and compliance with emissions regulations.

How to diagnose DTC P0215

To diagnose DTC P0215, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P0215.
2. Inspect the cold start injector 2 and its wiring for any visible damage or disconnections.
3. Check the resistance of the cold start injector using a multimeter to ensure it is within specifications.
4. Test the voltage and ground supply to the injector while the engine is running.
5. Examine the ECM for any fault codes or issues that may affect injector operation.

How to fix DTC P0215 step-by-step instructions

To fix DTC P0215, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the cold start injector 2.
3. If the cold start injector is faulty, replace it with a new one.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Start the engine and monitor for any reoccurrence of the DTC or symptoms.

How to erase DTC P0215

To erase DTC P0215, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.