P0223 – OBD-II DTC

OBD-II DTC P0223 – Throttle/Petal Position Sensor/Switch B Circuit Low Input

DTC P0223 meaning

DTC P0223 refers to a diagnostic trouble code indicating a low input signal from the Throttle/Pedal Position Sensor/Switch B circuit. This code is triggered when the Engine Control Module (ECM) detects that the voltage signal from the throttle position sensor is below the expected range, suggesting a potential issue with the sensor or its circuit.

DTC P0223 symptoms

Common symptoms associated with DTC P0223 may include:

• Illuminated check engine light
• Reduced engine power or limp mode
• Unresponsive throttle
• Erratic engine performance
• Difficulty accelerating

DTC P0223 causes

Several factors can lead to the triggering of DTC P0223, including:

• Faulty throttle position sensor
• Wiring issues such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Mechanical issues with the throttle body

DTC P0223 seriousness

DTC P0223 is considered a serious issue as it can lead to reduced engine performance and may affect vehicle safety. The vehicle may enter limp mode, limiting power and speed, which can be dangerous in certain driving conditions. It is advisable to address this code promptly to ensure safe operation of the vehicle.

How to diagnose DTC P0223

To diagnose DTC P0223, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the throttle position sensor and its wiring for visible damage.
3. Check the electrical connectors for corrosion or loose connections.
4. Test the throttle position sensor with a multimeter to ensure it operates within specifications.
5. Examine the ECM for any faults or updates that may be required.

How to fix DTC P0223 step-by-step instructions

To fix DTC P0223, follow these steps:

1. Disconnect the battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors related to the throttle position sensor.
3. If the throttle position sensor is faulty, replace it with a new one.
4. Reconnect all electrical connections securely.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P0223

To erase DTC P0223, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.