P0227 – OBD-II DTC

OBD-II DTC P0227 – Throttle/Petal Position Sensor/Switch C Circuit Range/Performance Problem

DTC P0227 meaning

DTC P0227 refers to a problem with the Throttle/Pedal Position Sensor/Switch C Circuit. This code indicates that the voltage signal from the throttle position sensor is out of the expected range or is not performing as it should. The throttle position sensor is crucial for monitoring the position of the throttle plate and providing feedback to the engine control module (ECM) for optimal engine performance.

DTC P0227 symptoms

Common symptoms associated with DTC P0227 may include:

• Illuminated check engine light
• Reduced engine power or acceleration
• Unstable or erratic engine idle
• Difficulty in shifting gears (in automatic transmissions)
• Increased fuel consumption

DTC P0227 causes

Several factors can lead to the triggering of DTC P0227, including:

• Faulty throttle position sensor
• Wiring issues such as shorts, opens, or corrosion in the sensor circuit
• Faulty engine control module (ECM)
• Mechanical issues with the throttle body
• Improperly calibrated throttle position sensor

DTC P0227 seriousness

DTC P0227 is considered a serious issue as it can affect the vehicle’s performance and drivability. If left unaddressed, it may lead to further engine problems, increased emissions, and potential safety hazards due to reduced power or erratic throttle response. It is advisable to diagnose and repair this issue promptly.

How to diagnose DTC P0227

To diagnose DTC P0227, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the throttle position sensor and its wiring for any visible damage or corrosion.
3. Check the voltage output of the throttle position sensor using a multimeter.
4. Compare the readings to the manufacturer’s specifications.
5. Test the ECM for any faults or issues that may affect the throttle position sensor readings.
6. Perform a visual inspection of the throttle body for any mechanical obstructions.

How to fix DTC P0227 step-by-step instructions

To fix DTC P0227, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical components.
2. Inspect and repair any damaged wiring or connectors related to the throttle position sensor.
3. If the throttle position sensor is faulty, replace it with a new one.
4. Clean the throttle body to remove any carbon buildup that may affect its operation.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P0227

To erase DTC P0227, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.