P0228 – OBD-II DTC

OBD-II DTC P0228 – Throttle/Petal Position Sensor/Switch C Circuit Low Input

DTC P0228 meaning

DTC P0228 refers to a diagnostic trouble code that indicates a low input signal from the Throttle/Pedal Position Sensor/Switch C circuit. This sensor is crucial for monitoring the position of the throttle and the accelerator pedal, which helps the engine control module (ECM) manage engine performance and emissions. A low input signal suggests that the ECM is receiving a voltage level that is below the expected range, which can lead to improper engine operation.

DTC P0228 symptoms

Common symptoms associated with DTC P0228 may include:

• Illuminated check engine light
• Reduced engine power or performance
• Unresponsive throttle or accelerator pedal
• Erratic engine behavior or stalling
• Difficulty in accelerating

DTC P0228 causes

Several factors can lead to the occurrence of DTC P0228, including:

• Faulty throttle position sensor
• Wiring issues such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty engine control module (ECM)
• Mechanical issues with the throttle body

DTC P0228 seriousness

DTC P0228 can be considered serious as it may lead to reduced engine performance and drivability issues. If left unaddressed, it can result in further damage to the engine or related components. It is advisable to diagnose and repair the issue promptly to ensure safe vehicle operation.

How to diagnose DTC P0228

To diagnose DTC P0228, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0228 code.
2. Inspect the throttle position sensor and its wiring for any visible damage.
3. Check the electrical connectors for corrosion or loose connections.
4. Test the throttle position sensor using a multimeter to ensure it operates within the specified voltage range.
5. Examine the ECM for any faults or updates that may be required.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC P0228 step-by-step instructions

To fix DTC P0228, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors related to the throttle position sensor.
3. If the throttle position sensor is faulty, replace it with a new one.
4. Reconnect all electrical connections securely.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a road test to verify that the issue has been resolved and the code does not return.

How to erase DTC P0228

To erase DTC P0228, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.