P0230 – OBD-II DTC

OBD-II DTC P0230 – Throttle/Petal Position Sensor/Switch C Circuit Intermittent

DTC P0230 meaning

DTC P0230 refers to a problem with the Throttle/Pedal Position Sensor/Switch C Circuit. This code indicates that the Engine Control Module (ECM) has detected an intermittent issue in the circuit that monitors the position of the throttle or accelerator pedal. The throttle position sensor is crucial for determining how much air enters the engine, which directly affects engine performance and emissions.

DTC P0230 symptoms

Common symptoms associated with DTC P0230 may include:

• Check Engine Light illuminated
• Unresponsive throttle or pedal
• Erratic engine performance
• Reduced engine power
• Stalling or hesitation during acceleration

DTC P0230 causes

Several factors can lead to the occurrence of DTC P0230, including:

• Faulty throttle position sensor
• Wiring issues, such as frayed or shorted wires
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Intermittent electrical connections

DTC P0230 seriousness

DTC P0230 is considered a serious issue as it can lead to poor engine performance and drivability problems. If left unaddressed, it may result in further damage to the engine or related components. It is advisable to diagnose and repair the issue promptly to ensure safe and efficient vehicle operation.

How to diagnose DTC P0230

To diagnose DTC P0230, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the throttle position sensor and its wiring for visible damage.
3. Check electrical connections for corrosion or looseness.
4. Test the throttle position sensor using a multimeter to ensure it operates within specifications.
5. Examine the ECM for any signs of failure or damage.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC P0230 step-by-step instructions

To fix DTC P0230, follow these step-by-step instructions:

1. Identify and repair any damaged wiring or connectors related to the throttle position sensor.
2. Replace the throttle position sensor if it is found to be faulty.
3. Ensure all electrical connections are secure and free of corrosion.
4. Check the ECM for updates or faults and replace if necessary.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to confirm that the issue has been resolved and the DTC does not return.

How to erase DTC P0230

To erase DTC P0230, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the DTC menu on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to ensure the DTC does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.