P0232 – OBD-II DTC

OBD-II DTC P0232 – Fuel Pump Secondary Circuit Low

DTC P0232 meaning

DTC P0232 refers to a diagnostic trouble code indicating a low voltage condition in the fuel pump secondary circuit. This code is triggered when the Engine Control Module (ECM) detects that the voltage in the secondary circuit of the fuel pump is below the expected threshold. The secondary circuit is responsible for controlling the operation of the fuel pump relay or the fuel pump itself.

DTC P0232 symptoms

Common symptoms associated with DTC P0232 may include:

• Engine stalling or difficulty starting
• Reduced engine performance
• Increased fuel consumption
• Check Engine Light illuminated
• Fuel pump not operating or intermittent operation

DTC P0232 causes

Several factors can lead to the triggering of DTC P0232, including:

• Faulty fuel pump
• Damaged or corroded wiring in the fuel pump circuit
• Defective fuel pump relay
• Issues with the ECM or its programming
• Poor ground connections

DTC P0232 seriousness

DTC P0232 is considered a serious issue as it can lead to fuel delivery problems. If the fuel pump is not functioning correctly, the engine may not receive the necessary fuel to operate, which can result in stalling or failure to start. Prolonged driving with this code can lead to further engine damage or increased repair costs.

How to diagnose DTC P0232

To diagnose DTC P0232, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0232 code.
2. Inspect the fuel pump relay and wiring for any visible damage or corrosion.
3. Check the fuel pump operation by listening for its sound when the ignition is turned on.
4. Test the voltage at the fuel pump connector with a multimeter.
5. Examine the ground connections for the fuel pump circuit.
6. Check the ECM for any additional trouble codes that may provide more context.

How to fix DTC P0232 step-by-step instructions

To fix DTC P0232, follow these steps:

1. Repair or replace any damaged wiring or connectors in the fuel pump circuit.
2. Replace the fuel pump relay if it is found to be faulty.
3. Install a new fuel pump if the existing one is defective.
4. Ensure all ground connections are clean and secure.
5. Recheck the voltage at the fuel pump connector to ensure it is within specifications.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to see if the code returns.

How to erase DTC P0232

To erase DTC P0232, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the “Erase Codes” or “Clear DTCs” function on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.