P0235 – OBD-II DTC

OBD-II DTC P0235 – Engine Overboost Condition

DTC P0235 meaning

DTC P0235 refers to an “Engine Overboost Condition.” This diagnostic trouble code indicates that the engine control module (ECM) has detected a boost pressure that exceeds the manufacturer’s specified limits. This situation typically occurs in vehicles equipped with a turbocharger or supercharger, where the boost pressure is crucial for optimal engine performance.

DTC P0235 symptoms

Common symptoms associated with DTC P0235 may include:

• Reduced engine power or performance
• Check Engine Light (CEL) illuminated
• Unusual engine noises, such as whistling or hissing
• Increased fuel consumption
• Engine stalling or misfiring

DTC P0235 causes

Several factors can lead to the triggering of DTC P0235, including:

• Faulty boost pressure sensor
• Vacuum leaks in the intake system
• Malfunctioning turbocharger or supercharger
• Clogged or damaged intercooler
• Issues with the wastegate or wastegate actuator
• Faulty engine control module (ECM)

DTC P0235 seriousness

DTC P0235 is considered a serious issue as it can lead to engine damage if not addressed promptly. Overboost conditions can cause excessive pressure in the engine, potentially leading to component failure. It is essential to diagnose and repair the underlying cause to prevent further damage and ensure the vehicle operates safely and efficiently.

How to diagnose DTC P0235

To diagnose DTC P0235, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0235 code.
2. Inspect the boost pressure sensor and its wiring for damage or disconnection.
3. Check for vacuum leaks in the intake system.
4. Test the turbocharger or supercharger for proper operation.
5. Examine the wastegate and wastegate actuator for functionality.
6. Review the vehicle’s service history for any recent repairs or modifications that may affect boost pressure.

How to fix DTC P0235 step-by-step instructions

To fix DTC P0235, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Perform a visual inspection of the boost pressure sensor and wiring.
3. Repair or replace any damaged components found during the inspection.
4. Check for vacuum leaks and repair as necessary.
5. Test the turbocharger or supercharger for proper operation and replace if faulty.
6. Inspect and repair the wastegate and actuator if they are not functioning correctly.
7. Recheck the system for any additional DTCs after repairs.

How to erase DTC P0235

To erase DTC P0235, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.