P0236 – OBD-II DTC

OBD-II DTC P0236 – Turbocharger Boost Sensor A Circuit Malfunction

DTC P0236 meaning

DTC P0236 refers to a malfunction in the Turbocharger Boost Sensor A circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the signal from the boost sensor, which measures the pressure of the air entering the engine after it has been compressed by the turbocharger. A malfunction in this circuit can lead to improper engine performance and reduced efficiency.

DTC P0236 symptoms

Common symptoms associated with DTC P0236 may include:

• Check Engine Light illuminated
• Reduced engine power or performance
• Increased fuel consumption
• Turbocharger not functioning properly
• Engine stalling or misfiring

DTC P0236 causes

Several factors can contribute to the occurrence of DTC P0236, including:

• Faulty turbocharger boost sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connections
• Vacuum leaks in the intake system
• Faulty Engine Control Module (ECM)

DTC P0236 seriousness

DTC P0236 can be considered serious as it affects the engine’s performance and efficiency. If left unaddressed, it may lead to further engine damage, increased emissions, and potential failure of the turbocharger system. It is advisable to diagnose and repair the issue promptly to avoid more significant problems.

How to diagnose DTC P0236

To diagnose DTC P0236, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0236 code.
2. Inspect the turbocharger boost sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of debris.
4. Test the turbocharger boost sensor using a multimeter to verify its output voltage against manufacturer specifications.
5. Inspect the intake system for any vacuum leaks that may affect sensor readings.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P0236 step-by-step instructions

To fix DTC P0236, follow these steps:

1. Identify and repair any damaged wiring or connectors related to the turbocharger boost sensor.
2. If the turbocharger boost sensor is faulty, replace it with a new one.
3. Ensure all electrical connections are clean and secure.
4. Check for and repair any vacuum leaks in the intake system.
5. After repairs, clear the DTC using an OBD-II scanner.
6. Perform a test drive to confirm that the issue has been resolved and the code does not return.

How to erase DTC P0236

To erase DTC P0236, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Follow the prompts to clear the trouble codes from the ECM.
5. Disconnect the scanner and start the engine to verify that the Check Engine Light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.