OBD-II DTC P0238 – Turbocharger Boost Sensor A Circuit Low
DTC P0238 meaning
DTC P0238 refers to a diagnostic trouble code indicating a low voltage condition in the Turbocharger Boost Sensor A circuit. This sensor measures the boost pressure produced by the turbocharger, which is crucial for the engine’s performance and efficiency. When the Engine Control Module (ECM) detects a voltage reading from the sensor that is lower than expected, it triggers this code.
DTC P0238 symptoms
Common symptoms associated with DTC P0238 may include:
- Reduced engine power or performance
- Increased fuel consumption
- Check Engine Light (CEL) illuminated
- Turbocharger not functioning properly
- Engine stalling or misfiring
DTC P0238 causes
Several factors can lead to the triggering of DTC P0238, including:
- Faulty turbocharger boost sensor
- Wiring issues such as shorts or open circuits in the sensor circuit
- Corroded or loose electrical connections
- Faulty Engine Control Module (ECM)
- Vacuum leaks in the intake system
DTC P0238 seriousness
DTC P0238 can be considered serious as it affects the engine’s performance and efficiency. If left unaddressed, it may lead to further engine damage or increased emissions. It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.
How to diagnose DTC P0238
To diagnose DTC P0238, follow these steps:
- Use an OBD-II scanner to confirm the presence of the code.
- Inspect the turbocharger boost sensor and its wiring for any visible damage.
- Check the electrical connections for corrosion or looseness.
- Test the voltage output of the turbocharger boost sensor using a multimeter.
- Inspect for vacuum leaks in the intake system.
- Clear the code and perform a test drive to see if the code reappears.
How to fix DTC P0238 step-by-step instructions
To fix DTC P0238, follow these step-by-step instructions:
- Gather necessary tools: OBD-II scanner, multimeter, and basic hand tools.
- Disconnect the negative battery terminal to ensure safety.
- Locate the turbocharger boost sensor and inspect it for damage.
- Check the wiring and connectors for any signs of wear or corrosion.
- If the sensor is faulty, replace it with a new one.
- Repair any damaged wiring or connections as needed.
- Reconnect the negative battery terminal.
- Clear the DTC using the OBD-II scanner.
- Perform a test drive to ensure the issue is resolved and the code does not return.
How to erase DTC P0238
To erase DTC P0238, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
- Confirm the action to clear the trouble codes.
- Disconnect the scanner and start the engine to verify that the code does not reappear.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.