P0239 – OBD-II DTC

OBD-II DTC P0239 – Turbocharger Boost Sensor A Circuit High

DTC P0239 meaning

DTC P0239 refers to a diagnostic trouble code that indicates a problem with the Turbocharger Boost Sensor A Circuit. Specifically, it signifies that the voltage signal from the boost sensor is higher than the expected range. This sensor is crucial for monitoring the boost pressure produced by the turbocharger, which is essential for optimal engine performance.

DTC P0239 symptoms

Common symptoms associated with DTC P0239 may include:

• Reduced engine power or performance
• Increased fuel consumption
• Check Engine Light illuminated
• Turbocharger not functioning properly
• Unusual engine noises

DTC P0239 causes

Several factors can lead to the triggering of DTC P0239, including:

• Faulty turbocharger boost sensor
• Wiring issues or damaged connectors in the boost sensor circuit
• Vacuum leaks in the intake system
• Faulty turbocharger
• ECU (Engine Control Unit) malfunction

DTC P0239 seriousness

DTC P0239 can be considered serious as it affects the engine’s performance and efficiency. If left unaddressed, it may lead to further engine damage or increased emissions. It is advisable to diagnose and repair the issue promptly to maintain vehicle reliability and performance.

How to diagnose DTC P0239

To diagnose DTC P0239, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0239 code.
2. Inspect the turbocharger boost sensor and its wiring for any visible damage or disconnections.
3. Check for vacuum leaks in the intake system.
4. Test the voltage output of the boost sensor using a multimeter.
5. Compare the readings with the manufacturer’s specifications.
6. Examine the turbocharger for proper operation.
7. Check the ECU for any software updates or faults.

How to fix DTC P0239 step-by-step instructions

To fix DTC P0239, follow these steps:

1. Repair or replace any damaged wiring or connectors in the boost sensor circuit.
2. Replace the faulty turbocharger boost sensor if it is not functioning correctly.
3. Fix any vacuum leaks found in the intake system.
4. Ensure the turbocharger is operating properly and replace it if necessary.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to see if the code returns.

How to erase DTC P0239

To erase DTC P0239, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.