P0240 – OBD-II DTC

OBD-II DTC P0240 – Turbocharger Boost Sensor B Malfunction

DTC P0240 meaning

DTC P0240 refers to a malfunction in the Turbocharger Boost Sensor B. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the sensor responsible for measuring the boost pressure in the turbocharger system. The boost sensor plays a critical role in optimizing engine performance and efficiency by providing real-time data to the ECM.

DTC P0240 symptoms

Common symptoms associated with DTC P0240 may include:

• Reduced engine power or performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Turbocharger not functioning properly
• Unusual engine noises

DTC P0240 causes

Several factors can lead to the triggering of DTC P0240, including:

• Faulty Turbocharger Boost Sensor B
• Wiring issues or damaged connectors
• Vacuum leaks in the intake system
• Faulty turbocharger
• Issues with the Engine Control Module (ECM)

DTC P0240 seriousness

The seriousness of DTC P0240 can vary depending on the underlying cause. While it may not cause immediate engine failure, it can lead to:

• Decreased engine performance
• Increased emissions
• Potential damage to the turbocharger
• Long-term engine issues if left unaddressed

How to diagnose DTC P0240

To diagnose DTC P0240, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0240 code.
2. Inspect the Turbocharger Boost Sensor B and its wiring for damage or disconnections.
3. Check for vacuum leaks in the intake system.
4. Test the Turbocharger Boost Sensor B with a multimeter to ensure it is functioning correctly.
5. Examine the turbocharger for any mechanical issues.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P0240 step-by-step instructions

To fix DTC P0240, follow these steps:

1. Identify and replace the faulty Turbocharger Boost Sensor B if necessary.
2. Repair or replace any damaged wiring or connectors associated with the sensor.
3. Fix any vacuum leaks found in the intake system.
4. Address any issues with the turbocharger itself, such as replacing it if it is faulty.
5. Recheck the system with an OBD-II scanner to ensure the code is cleared.

How to erase DTC P0240

To erase DTC P0240, you can follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.