P0243 – OBD-II DTC

OBD-II DTC P0243 – Turbocharger Boost Sensor B Circuit High

DTC P0243 meaning

DTC P0243 refers to a diagnostic trouble code that indicates a problem with the Turbocharger Boost Sensor B Circuit. Specifically, it signifies that the voltage signal from the boost sensor is higher than the expected range. This sensor is crucial for monitoring the boost pressure produced by the turbocharger, which is essential for optimal engine performance and efficiency.

DTC P0243 symptoms

Common symptoms associated with DTC P0243 may include:

• Reduced engine power or performance
• Increased fuel consumption
• Check Engine Light illuminated
• Turbocharger not functioning properly
• Engine stalling or misfiring

DTC P0243 causes

Several factors can lead to the triggering of DTC P0243, including:

• Faulty turbocharger boost sensor
• Wiring issues, such as short circuits or open circuits
• Corroded or damaged connectors
• Faulty engine control module (ECM)
• Vacuum leaks in the intake system

DTC P0243 seriousness

DTC P0243 is considered a serious issue as it can affect engine performance and efficiency. If left unaddressed, it may lead to further engine damage or increased emissions. It is advisable to diagnose and repair the issue promptly to maintain vehicle reliability and performance.

How to diagnose DTC P0243

To diagnose DTC P0243, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0243 code.
2. Inspect the turbocharger boost sensor and its wiring for any visible damage or corrosion.
3. Check the voltage output of the boost sensor using a multimeter.
4. Test the continuity of the wiring between the sensor and the ECM.
5. Inspect for any vacuum leaks in the intake system.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P0243 step-by-step instructions

To fix DTC P0243, follow these steps:

1. Identify and replace any faulty turbocharger boost sensor.
2. Repair or replace damaged wiring or connectors associated with the boost sensor.
3. Ensure all connections are secure and free from corrosion.
4. Fix any vacuum leaks in the intake system.
5. Recheck the voltage output of the boost sensor after repairs.
6. Clear the DTC using an OBD-II scanner and perform a test drive to confirm the issue is resolved.

How to erase DTC P0243

To erase DTC P0243, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the engine to ensure the check engine light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.