P0247 – OBD-II DTC

OBD-II DTC P0247 – Turbocharger Wastegate Solenoid A High

DTC P0247 meaning

DTC P0247 refers to a diagnostic trouble code that indicates a problem with the turbocharger wastegate solenoid A. Specifically, it signifies that the solenoid is experiencing a high voltage condition. The wastegate solenoid controls the opening and closing of the wastegate, which regulates the boost pressure produced by the turbocharger. When the solenoid fails or malfunctions, it can lead to improper boost levels, affecting engine performance and efficiency.

DTC P0247 symptoms

Common symptoms associated with DTC P0247 may include:

• Reduced engine power or acceleration
• Increased turbo lag
• Check Engine Light (CEL) illuminated
• Unusual engine noises, such as whistling or hissing
• Poor fuel economy

DTC P0247 causes

Several factors can lead to the occurrence of DTC P0247, including:

• Faulty turbocharger wastegate solenoid A
• Wiring issues, such as short circuits or open circuits
• Corroded or damaged connectors
• Vacuum leaks in the wastegate control system
• Faulty engine control module (ECM)

DTC P0247 seriousness

The seriousness of DTC P0247 can vary depending on the specific vehicle and its operating conditions. However, it is generally considered a moderate to serious issue because:

• It can lead to reduced engine performance and efficiency.
• It may cause increased emissions due to improper fuel-air mixture.
• Prolonged driving with this code can result in further engine damage.

How to diagnose DTC P0247

To diagnose DTC P0247, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0247 code.
2. Inspect the turbocharger wastegate solenoid A and its wiring for visible damage.
3. Check the electrical connections for corrosion or looseness.
4. Test the voltage and ground at the solenoid using a multimeter.
5. Perform a vacuum test on the wastegate actuator to ensure it operates correctly.
6. Clear the code and take the vehicle for a test drive to see if the code returns.

How to fix DTC P0247 step-by-step instructions

To fix DTC P0247, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the wastegate solenoid.
2. Replace the turbocharger wastegate solenoid A if it is found to be faulty.
3. Fix any vacuum leaks in the wastegate control system.
4. Ensure that the engine control module (ECM) is functioning properly.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to confirm that the issue is resolved and the code does not return.

How to erase DTC P0247

To erase DTC P0247, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.