P0268 – OBD-II DTC

OBD-II DTC P0268 – Cylinder 3 Injector Circuit Low

DTC P0268 meaning

DTC P0268 refers to a diagnostic trouble code indicating a low voltage condition in the injector circuit for cylinder 3. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors the performance of the engine and its components. When the Engine Control Module (ECM) detects that the voltage in the injector circuit for cylinder 3 is below the expected range, it triggers this code. This can lead to improper fuel delivery and engine performance issues.

DTC P0268 symptoms

Common symptoms associated with DTC P0268 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated

DTC P0268 causes

Several factors can lead to the triggering of DTC P0268, including:

• Faulty fuel injector for cylinder 3
• Wiring issues, such as damaged or corroded wires
• Bad electrical connections in the injector circuit
• Faulty Engine Control Module (ECM)
• Low battery voltage or poor ground connections

DTC P0268 seriousness

DTC P0268 can be considered serious as it may lead to engine performance issues. If left unaddressed, it can result in:

• Increased emissions
• Potential engine damage due to misfires
• Reduced fuel efficiency
• Failure to pass emissions tests

How to diagnose DTC P0268

To diagnose DTC P0268, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0268 code.
2. Inspect the wiring and connectors for cylinder 3 injector for any visible damage or corrosion.
3. Check the resistance of the injector using a multimeter to ensure it is within specifications.
4. Test the voltage supply to the injector while the engine is running.
5. Examine the ECM for any faults or updates that may affect injector operation.

How to fix DTC P0268 step-by-step instructions

To fix DTC P0268, follow these steps:

1. Repair or replace any damaged wiring or connectors in the injector circuit.
2. If the injector is faulty, replace the fuel injector for cylinder 3.
3. Ensure that the battery voltage is adequate and that all ground connections are secure.
4. Recheck the injector resistance and voltage supply to confirm proper operation.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the code does not return.

How to erase DTC P0268

To erase DTC P0268, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.