P0290 – OBD-II DTC

OBD-II DTC P0290 – Cylinder 10 Injector Circuit High

DTC P0290 meaning

DTC P0290 refers to a diagnostic trouble code indicating a problem with the cylinder 10 injector circuit. Specifically, it signifies that the injector circuit for cylinder 10 is experiencing a high voltage condition. This can lead to improper fuel delivery, affecting engine performance and efficiency.

DTC P0290 symptoms

Common symptoms associated with DTC P0290 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated

DTC P0290 causes

Several factors can contribute to the occurrence of DTC P0290, including:

• Faulty fuel injector for cylinder 10
• Wiring issues or short circuits in the injector circuit
• Faulty engine control module (ECM)
• Corroded or loose electrical connections
• Faulty fuel pressure regulator

DTC P0290 seriousness

The seriousness of DTC P0290 can vary, but it is generally considered a moderate to serious issue. If left unaddressed, it can lead to:

• Severe engine damage
• Increased emissions
• Reduced fuel efficiency
• Potential failure of the vehicle to start

How to diagnose DTC P0290

To diagnose DTC P0290, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0290 code.
2. Inspect the wiring and connectors for cylinder 10 injector for any visible damage or corrosion.
3. Check the resistance of the injector to ensure it is within specifications.
4. Test the voltage supply to the injector while the engine is running.
5. Examine the ECM for any faults or updates that may be necessary.

How to fix DTC P0290 step-by-step instructions

To fix DTC P0290, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the cylinder 10 injector.
3. If the injector is faulty, replace it with a new one.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Start the engine and monitor for any reoccurrence of the P0290 code.

How to erase DTC P0290

To erase DTC P0290, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.