P0323 – OBD-II DTC

OBD-II DTC P0323 – Ignition/Distributor Engine Speed Input Circuit No Signal

DTC P0323 meaning

DTC P0323 refers to a diagnostic trouble code indicating that the Engine Control Module (ECM) has detected a problem with the ignition or distributor engine speed input circuit. Specifically, it signifies that the ECM is not receiving a signal from the engine speed sensor, which is crucial for proper engine timing and performance.

DTC P0323 symptoms

Common symptoms associated with DTC P0323 may include:

• Check Engine Light illuminated
• Engine misfires or runs rough
• Decreased engine performance
• Difficulty starting the engine
• Stalling or hesitation during acceleration

DTC P0323 causes

Several factors can lead to the triggering of DTC P0323, including:

• Faulty engine speed sensor
• Wiring issues, such as damaged or corroded connectors
• Faulty ignition control module
• Issues with the ECM itself
• Improperly installed or malfunctioning distributor

DTC P0323 seriousness

DTC P0323 is considered a serious issue as it can affect engine performance and drivability. If left unaddressed, it may lead to further engine damage or increased emissions. It is advisable to diagnose and repair the issue promptly to ensure safe and efficient vehicle operation.

How to diagnose DTC P0323

To diagnose DTC P0323, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0323 code.
2. Inspect the engine speed sensor and its wiring for any visible damage or disconnections.
3. Test the engine speed sensor using a multimeter to check for proper voltage and resistance.
4. Check the ignition control module and its connections for faults.
5. Examine the ECM for any signs of failure or corrosion.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P0323 step-by-step instructions

To fix DTC P0323, follow these step-by-step instructions:

1. Identify and replace any faulty engine speed sensor.
2. Repair or replace damaged wiring or connectors related to the engine speed sensor.
3. Test and replace the ignition control module if it is found to be defective.
4. Inspect and, if necessary, replace the ECM if it is determined to be malfunctioning.
5. Ensure that the distributor is properly installed and functioning correctly.
6. Clear the DTC using an OBD-II scanner and perform a test drive to confirm the issue is resolved.

How to erase DTC P0323

To erase DTC P0323, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.