P0325 – OBD-II DTC

OBD-II DTC P0325 – Ignition/Distributor Engine Speed Input Circuit Intermittent

DTC P0325 meaning

DTC P0325 refers to a diagnostic trouble code indicating an intermittent issue with the ignition or distributor engine speed input circuit. This code is triggered when the Engine Control Module (ECM) detects a problem with the signal from the engine speed sensor, which is crucial for proper engine timing and performance.

DTC P0325 symptoms

Common symptoms associated with DTC P0325 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Check Engine Light illuminated
• Difficulty starting the engine

DTC P0325 causes

Several factors can lead to the triggering of DTC P0325, including:

• Faulty engine speed sensor
• Wiring issues or damaged connectors in the ignition circuit
• Faulty ignition control module
• ECM software issues
• Intermittent electrical connections

DTC P0325 seriousness

DTC P0325 can be serious as it affects engine performance and drivability. If left unaddressed, it may lead to further engine damage or increased emissions. It is advisable to diagnose and repair the issue promptly to ensure optimal vehicle operation.

How to diagnose DTC P0325

To diagnose DTC P0325, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0325 code.
2. Inspect the engine speed sensor and its wiring for any visible damage or disconnections.
3. Check the resistance and voltage output of the engine speed sensor.
4. Test the ignition control module for proper operation.
5. Examine the ECM for any software updates or faults.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC P0325 step-by-step instructions

To fix DTC P0325, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the engine speed sensor.
2. Replace the engine speed sensor if it is found to be faulty.
3. Test and replace the ignition control module if necessary.
4. Update the ECM software if applicable.
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to ensure the issue is resolved and the code does not return.

How to erase DTC P0325

To erase DTC P0325, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.